High Density Polyethylene Lids

Item Description Vent
Capacity
(GPM)
Part Number Std. Pkg.
22″ Lid and ring with air vent 400 63679 6
22″ Lid, ventless with ring *   63863 6
16″ Lid and ring with 4″ center lid/air vent 100 60038 14
A 16″ Lid with 4″ center lid/air vent 100 60011 19
B 16″ Lid and ring with blue snap-in vent 200 63485 12
16″ Lid and ring with 3″ center thread   63868 12
16″ Ring only   60012
16″ Lid, ventless with ring   60367 10
16″ Lid, ventless   60365
4″ Lid (air vent assembly for 16″ lid)   60019 – 
Blue snap-in vent for 16″ lid (63485)   63539
8″ Lid, ring & air vent   60032 32
8″ Lid with air vent
(For select tanks manufactured prior to 2/2/08)
  60002 32
8″ Ring only (for 60002 lid)   60003
Snap on air vent for 8″ lid (60002)   61727
E 8″ Lid with blue snap-in vent 
(For select tanks manufactured after 2/2/08)
200 63480 28
Blue snap-in vent for 8″ lid (63480)   63482
5″ Lid with ball check air vent (for tanks manufactured prior to 2/1/00)   60322 72
5” Lid with ball check air vent, with gasket   63484 48
5″ lid with 2″ FPT (does not include vent cap)   63264 45
5″ Lid, hinged, (for 52 & 68 gallon flat bottom & 110 low profile)   63673 25
EPDM gasket for 5″ lids 60322, 63264 or 63484   60366
18″ lanyard for 8″ lid and 16″ non-hinged lid (tethers lid to tank)   62531 – 
Ethafoam gasket for 16″ non-hinged lid   62941
Stainless steel screw for 8″ and 16″ rings   60081
Strainer basket for 16″ fill-opening (7″ depth)   67374
* There is no connection point on this lid for a lanyard.

Hinged Lids

The hinged lid is manufactured from a co-polymer material for strength, durability and excellent chemical resistance. Our unique locking tab allows you to easily slip a padlock through it and secure your lid from theft or spills. The lid is interchangeable with a standard 16″ lid and ring assembly if you choose to replace your existing lid.

Specific features of the lid:

  • Easy open/close – opens a full 180 degrees
  • Comes complete with a baffle vent assembly which allows for adequate venting when bottom filling your tank
  • Unique locking tab
  • All parts of lid may be ordered as repair parts

Hinged Lids

Description Vent Capacity (GPM) Part Number Std Pkg
22″ Hinged lid with ring & vent 250 63874 8
16″ Hinged lid with ring & vent 100 62532 6
16″ Hinged lid with vent assembly, without ring 100 62826 6
16″ Hinged ventless lid, with ring   63390 6

16″ Hinged Lid Repair Parts

Description Part Number Std
Pkg
16″ Hinged Lid Repair Parts
Description Part Number Std Pkg
Vent assembly 62827
Ring Assembly 62828
Hinge Assembly 62829
EPDM O-ring gasket for lid 62830
Neoprene O-ring for ring 62831

Part dimensions may vary and are subject to change without notice.